Trampoline spare parts
Spare parts for
your Jump’Up, Booster, Waouuh ! and Apollo Sport trampolines
 

Rest assured that once your trampoline is delivered, we will guarantee the supply of spare parts for many years to come. We pay special attention to our after sales service and to our clients who wish to take care of their equipment throughout its lifespan. Our inventory of spare parts is quite long and includes parts that you might need, even if it is not a trampoline from France Trampoline !

If this is the case, we may very well have a part that corresponds to your trampoline or is close enough allowing the part to be adapted appropriately. And if we don’t have the part, we can provide an estimate for the manufacturing of a jumping surface or a protective pad.

If you have any doubt, please don’t hesitate to contact us by mail or by phone to explain your needs in detail.

IMPORTANT : please contact us for :
  • any spare parts for the Gym Tramp, Minitop, Waouuh ! (earlier model), Apollo and Aero models.
  • any steel elements that are part of the structure of the trampoline, no matter which model.

On this page, you will find at a glance the spare parts you are looking for, for your trampoline. They are positionned according to product type. You can access their technical description by clicking on the chosen thumbnail.
 
Protective trampoline pads
Add to basket

Protective pad

The protective pad ensures that there is no contact between the user and the hard parts of the trampoline, meaning the springs or the frame. With its standard dimensions, it is adaptable to most of the round trampolines on the market.

In order to correctly determine the diameter that corresponds to your needs, you should measure the following elements on your trampoline :
  • Outside diameter (steel structure) of the trampoline.
  • Outside length (including hooks) of a spring at rest.
  • Width of pad currently in place (if possible).
After taking these measurements, you may refer to the technical specifications table and choose the pad reference that most closely matches your own.
 
Trampoline jumping surface
Add to basket

Jumping surface

Over the course of your trampoline’s life, you may need to replace the jumping surface. Besides our jumping surface line for trampolines, quite often we are in a position to supply you with jumping surfaces that adapt perfectly to your standard-sized equipment.

In order to determine the jumping surface that corresponds best to your needs, we ask that you measure the following parts of your trampoline :
  • Outside diameter (steel structure) of the trampoline.
  • Outside length (including hooks) of the springs at rest.
  • Number of springs on the trampoline.
After measuring, you may refer to the technical specifications sheet and choose the surface reference that most closely matches your criteria.
 
  • Protected against corrosion
  • Outside length of 180, 185, 215, 230 or 250 mm including hooks,
  • Wire diameter : 3.2 or 3.3 mm,
  • Spire diameter : 26 or 28 mm,
  • High coil tension for dynamic power,
  • Conical extremities for heightened power at the beginning of elongation 180, 215 et 230 mm models,
  • Delivered in boxed packaging.
 
Reference
1000  Add to basket
1000G  Add to basket
1020  Add to basket
1020G  Add to basket
1023  Add to basket
1023G  Add to basket
1043  Add to basket
1015  Add to basket
Outside length (including hooks) 180 mm 180 mm 215 mm 215 mm 230 mm 230 mm 250 mm 185 mm
Spire diameter 26 mm 26 mm 28 mm 28 mm 28 mm 28 mm 31 mm 31 mm
Total weight 179 g 179 g 217 g 217 g 285 g 285 g 354 g 258 g
Price
(if springs are delivered
alone :
+ 19 € ATI
handling costs)

2,50€ ATI

2,50€ ATI

2,70€ ATI

2,70€ ATI

2,90€ ATI

2,90€ ATI

4,66€ ATI

3,89€ ATI

Corresponding or
matching
France Trampoline
models
Jump'Up
(previous models)
Jump'Up Booster 300
(previous models)
Booster 300 Booster
Waouuh !
Apollo Sport
(previous models)
Booster
Waouuh !
Apollo Sport
Apollo
Aéro
Gym Tramp
Minitop
Waouuh !
(previous model)

If for whatever reason, you can not find the dimensions and shape you desire, we are available to advise you on your specific needs. A customized construction should first be subject to a cost estimate, and then after authorization, put into planning in the factory. Do not hesitate to send us by fax or by mail the dimensions and/or a plan of your protective pad(s).

 


Need some equipment for professional trampoline ? Your kids require a round trampoline model or a mini-trampoline for summer time ? Do not hesitate, you will find all products by France Trampoline.

contact